FPT INDUSTRIAL UNVEILS THE NEW C16 1000 MARINE ENGINE AT 2018 CANNES YACHTING FESTIVAL
The perks regard both the aesthetic and technical aspects of the engine, which has a 6-cylinder in-line architecture and features the latest generation Common Rail injection
system (up to 2,200 bar). Its power can reach 1,000 hp at 2,300 rpm, placing itself among the best-in-class performance of the category.
The new C16 1000 has the best durability – 25% more than the competitors’ average – while the power (63 hp/lt) and torque (220 Nm/lt) density are among the best of light commercial segment. These great characteristics couple with a maximum lightness and a best-in-class power to weight ratio (0,59hp/kg), thus delivering at the same time top performance and best durability. The customer will have an increased cruising and a max speed together with the best transient response for planing.
In order to maximize reliability and resistance to salt and water, the C16 1000 has been designed with specific air, water, oil and fuel circuits. The marinization set includes: heavy duty, high flow sea water pump, a new heat exchanger for improved heat rejection, anodyzed air-intake pipes, a new air filter in epoxy-based material more resistant to salt and humidity, and twisted wirings for maximum resistance to dirt, water and sludge.
The C16 1000 has the compactness of a 13-liter engine, which not only means it is among the best-in-class of its category but that the final customer will have an easier installation and wider space on board as well. Furthermore, the engine has a best-in-class maintenance period of up to 600 hours, which translates into easier and cheaper maintenance operations.
Inside, the C16 1000 features increased fatigue strength new material components (cylinder block, cylinder head made in Compacted Graphite Iron - CGI, crankshaft and bearings, con-rods, steel pistons, rings, increased flows for oil and water circuits with a professional bronze body and impeller sea water pump) and the last generation of Common Rail (up to 2,200 bars) with multi-point fuel injection. The turbocharging system is distinguished by a simple and efficient technology with 2 single stage water cooled WG Turbo while the clean and functional lay-out is focused on engine easy serviceability and maintenance, thus granting premium performance, reliability and durability.
Finally, regarding the environmental performance, the C16 1000 respects the most stringent regulations as along with all the other FPT Industrial engines. Its impact on the environment is reduced for gas emissions, noise, and vibrations, providing not just positive general effects, but also higher comfort of navigation. To achieve these benefits in terms of sustainability, C16 1000 also offers a blow-by system for the best recovery of oil vapors and new green filters for better treatment of engine oils.
|Architecture||6 Cylinder in line|
|Injection System||Common Rail (up to 2,200bar) / 2 water cooled waste gate turbo|
|Air Handling||Single Stage + Aftercooler|
|Valves per Cylinder||4|
|Bore x Stroke||141 x 170 mm|
|Max Rated Power||1,000 hp @ 2,300 rpm|
|Max Torque||3,500 Nm|
|Dry Weight||1,690 kg|
|Dimensions (L/W/H)||1,465 x 1,136 x 1,160 mm|
MORE FROM FPT INDUSTRIAL
Fabio LeporeBrand Management & Corporate Communications FPT Industrial EMEA and North AmericaItalypress@fptindustrial.com+39 011 007 6720
Rebecca WengMarketing & Product Management DirectorChinarebecca.email@example.com+86 21 2082 2085
Rachel WangSenior Marketing SpecialistChinarachel.firstname.lastname@example.org+ 86 021 20822048 2048