FPT Industrial Research and Development Centers: A Worldwide Presence
In the United States, FPT Industrial is present with its Burr Ridge R&D Center dedicated to engines applications for CNH Industrial and US non-captive customers; in Brazil, in Betim, FPT Industrial customizes its engines and applications for the Latin American market; while in Chongqing, in China, SFH (FPT Industrial joint venture) dedicates its work to engines customization and applications for the Asian market.
Profile of Turin Testing Center in numbers
|Turin Testing Center surface:||28,000sqm|
|Employees:||More than 400|
|Engine Test Benches (Diesel and CNG):||51|
|Driveline Test Benches:||30|
|Natural Gas dedicated Testing Cells:||10|
|Running Hours:||140,000 hrs/year|
|CO2 emissions reduction:||2,000 tons/year|
|Energy self produced:||2.700.000 kWh/year|
FPT Industrial's Turin Testing Center has created a "green factory" which has increased the energy efficiency of processes and reduced CO2 emissions. The theme of "innovation" continues as a driving factor. The Turin Testing Center is considered a global reference point for the development and certification of engines and after-treatment systems, as well as the development of axles and transmissions for both CNH Industrial sister brands and our customers worldwide. Since 2014, renewal processes centered on experimentation and improvement have led radical change to result in zero environmental impact.
This renovation involved the entire location, which covers an area of 28,000 square meters (over 30,000 square feet), and encases an environment where nearly 400 people are employed, including engineers, specialized technicians and other professionals. In recent years, the Turin Testing Center features new test cells, custom developed for physical road testing. Today, the area has a total of 90 test cells. For example, the climatic-barometer test cell boasts a groundbreaking instrumentation and control system: here you can set and reproduce weather-climatic parameters from -35 to +40 Celsius degrees (-36 to +104 degrees Farenheit) and simulate altitude conditions that can vary from sea level to 4,000 meters (over 13,000 feet) of altitude.
Other flagships cells are dedicated to the development of hybrid light vehicles equipped with a "battery simulator". Also, there is a "tilting" cell, in which engines with maximum 45 degree inclinations are tested on all axes to simulate special applications such as agricultural, marine and quarrying. Focus on sustainability and consumption also involves working environments with maintenance and renewal interventions within the buildings. In all areas, lighting systems have been converted to LED with control management systems, and concentrated thermodynamic solar plants - such as Trinum - have been introduced. This produces electricity and hot water throughout the building, with an important saving on water consumption. Overall, it is the mindset of evolving change and drive for continuous improvement that is most impactful. Thanks to all these activities FPT Industrial's "green heart" during 2016 was able to self-produce energy for over 2,700,000 kWh.
Turin, October 30, 2017
Fabio LeporeMedia RelationsItalyfabio.firstname.lastname@example.org-
MORE FROM FPT INDUSTRIAL
Miller-Bradford & Risberg Supports Team Rubicon in Response to Severe Storm Damage in Northeast Wisconsin
FROM FARM TO TABLE: FPT INDUSTRIAL AND EATALY TELL THE STORY OF THE FOOD CHAIN ENGINE
CASE Dealer Century Equipment Provides Team Rubicon With Compact Track Loader and Mini Excavator to Assist in Colorado Flood Response